Your Cart

This indoor use only* thermometer is intended for the periodic measurement and monitoring of human body temperature.

It is a high quality product incorporating the latest technology and tested in accordance with international standards. With its unique technology, this thermometer can provide a stable, heat interference-free reading with each measurement. The instrument performs a self-test every time it is switched on to always guarantee the specified accuracy of measurements.

This thermometer has been clinically tested and proven to be safe and accurate when used in accordance with its operating instruction manual.

Please read through the instructions carefully so that you understand all functions and safety information.

*ISO 80601-2-56 states that a non-contact forehead thermometer cannot be used when the room temperature is lower than 16 degrees celcius. The main reason is that if the temperature is too low, the blood on the forehead cannot be fully circulated, and most of it will be concentrated on the organs, namely to protect the heart. Therefore, the ambient temperature of a room must not be lower than 16 degrees celcius, as it is impossible to get an accurate enough measure under a low ambient temperature.

TGA Approved. ARTG ID 335773. View on the ARTG Register.


Non Contact Thermometer FR200

Measurement Range:

Body Mode: 34.0°C ~ 42.2.0°C (93.2°F ~ 108.0°F)

Object Mode: 0-100.0 °C (32-212.0 °F)


0.1 °C / °F

Measurement accuracy:

Laboratory: ±0.2°C,(±0.4°F) : 34.0°C~42.2°C (93.2°F ~ 108.0°F)


Liquid Crystal Display, 4 digits plus special


The unit is turned ON and ready for the measurement: 1 short beep Complete the measurement: 1 long beep (1 sec.) if the reading is less than 37.5 °C (99.5 °F), 10 short beep, if the reading is equal to or greater System error or malfunction:3 short sounds


Auto-Display the last measured temperature 30 readings recall in the Memory Mode


The display light will be GREEN for 4 seconds, when the unit is turned ON. The display light will be GREEN for 5 seconds, when a measurement is completed with a reading equal to or lower than 37.5 °C (99.5 °F).The display light will be RED for 5 seconds, when a measurement is completed with a reading equal to or higher than 37.5 °C (99.5 °F).

Operating Ambient

Body Mode: 16-40.0 °C (60.8-104.0 °F)

Object Mode: 5-40.0 °C (41-104.0 °F)


-20 °C to +50 °C (-4 °F to 122 °F)


15-95 % relative maximum humidity

Automatic Switch-off:

Approx. 1 minute after last measurement


2 x 1.5 V Batteries; size AAA,


145 x 36 x 32 mm


81 g (with batteries), 56 g (w/o batteries)

Reference to:

ISO 80601-2-56:2017 & EN12470-5:2003


EC 60601-1:2005+A1:2012 ; IEC 60601-1-2:2014 (EMC)